FINoT City Objects

FINoT Lighting Related products

Wireless Dimmable Controller

The FINoT Series luminaire controllers enable the wireless remote management and monitoring of LED and HID luminaires. Based on the FINoT platform, the controllers form an ultra-scalable self-healing mesh network connecting each luminaire to the Cloud. Each driver/ballast is controlled by means of an 1-10V interface in conjunction with a cut-off power circuit. A built-in utility grade power meter with < 1% accuracy constantly monitors the luminaire's input voltage, current and power consumption. User-selectable power profiles are downloaded and stored in the controller allowing full customization while pre-programmed profiles including dusk/dawn calculation may be used for simple and power-efficient control.

Features

  • 1-10V dimming interface
  • High-accuracy built-in power meter (< 1%)
  • 2.4GHz/20dBm max wireless interface
  • IEEE 802.15.4/6LoWPAN compatible
  • NTP-synchronized Realtime Clock
  • Unique EUI-64 MAC Address
  • Built-in astronomical clock for dusk/dawn calculation
  • Over-The-Air (OTA) firmware updates
  • Compatible with the FINoT Objects

Specifications

  • IP Rating IP 66
  • Load current 2A
  • Load capacity up to 10 drivers
  • Working Temp -40oC to 60oC

Sector Controller

The device at the edge of the wireless mesh network of FINoT Controllers is called FINoT Sector Controller. Its role is to collect and appropriately configure data coming from the sensor level (Luminaire Controller) and build the virtual objects that can be managed by user interface. It can be used with any compatible 6LoWPAN device in order to transfer the needed data to the edge of the network.

Features

  • Supported Network Protocols: UDP / TCP
  • Security through SSL tunnel, SSHv2, FIPS 197 (IPsec, HTTPS)
  • Routing Features through NAT, Port Forwarding, IP filtering
  • Web interface management via HTTP / HTTPS
  • Luminaire Controller wireless medium over IEEE 802.15.4
  • Internet connectivity through Ethernet port and/or 3G Modem
  • Can manage more than 100 luminaire controllers
  • Operating temperature -20oC to to +70oC
  • Overvoltage protection 2kV
  • Power consumption ≤ 20 W
  • Operating voltage: 90-254 VAC ± 10% @ 50/60 Hz ± 5%
  • Serial interface RS232/485 port
  • 2 * USB Type A connector
  • Ethernet 2 * RJ45 port
  • GSM embedded 3G Modem

FINoT Objects

Future Intelligence is developing FINoT devices that are compatible with FINoT Lighting and can also operate as network relays providing network expandability in places where it is needed FINoT Objects are capable to manage:
  • Waste: weight sensors, waste basket capacity sensors
  • City air quality: CO, CO2, NO, NO2, O3, PM10
  • Smart cities noise: noise sensor
  • Parking: proximity, occupancy

Contact us for personalized information

Skip to content